Rapid fabrication of MgO@g-C₃N₄ heterojunctions for photocatalytic nitric oxide removal

• Minh-Thuan Pham,
• Duyen P. H. Tran,
• Xuan-Thanh Bui and
• Sheng-Jie You

Beilstein J. Nanotechnol. 2022, 13, 1141–1154, doi:10.3762/bjnano.13.96

• pollutants with light under ambient conditions [10]. Due to its unique properties, such as high chemical stability and low synthesis cost, graphitic carbon nitride has attracted considerable attention in the realm of environmental remediation [11][12][13]. It is an organic semiconductor that effectively

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• organic semiconductors such as graphitic carbon nitride (g-C3N4) [71]. When acting as an auxiliary photocatalyst, SnO2 promotes the photocatalytic activity of the primary material [38][70][75][76]. Wu et al. reported the visible-light-driven elimination of NO over hydrothermally synthesized BiOBr/SnO2 p–n

• TiO2 and BiOBr, recent works reported the successful combination of SnO2 nanomaterials with conjugated polymers such as graphitic carbon nitride (g-C3N4) and polyaniline (PANI), yielding metal-free visible-light-driven photocatalysts for addressing NO gas pollution. Such combinations hold great

Nanoporous and nonporous conjugated donor–acceptor polymer semiconductors for photocatalytic hydrogen production

• Zhao-Qi Sheng,
• Yu-Qin Xing,
• Yan Chen,
• Guang Zhang,
• Shi-Yong Liu and
• Long Chen

Beilstein J. Nanotechnol. 2021, 12, 607–623, doi:10.3762/bjnano.12.50

• photocatalyst (i.e., poly(p-phenylene)) for PHP was reported, but did not attract much attention due to the low hydrogen evolution rate (HER) [11]. In 2009, Wang et al. reported a novel metal-free polymeric photocatalyst (i.e., graphitic carbon nitride (g-C3N4)), which could efficiently reduce protons to

Microwave-induced electric discharges on metal particles for the synthesis of inorganic nanomaterials under solvent-free conditions

• Vijay Tripathi,
• Harit Kumar,
• Anubhav Agarwal and
• Leela S. Panchakarla

Beilstein J. Nanotechnol. 2020, 11, 1019–1025, doi:10.3762/bjnano.11.86

• copper. Graphitic carbon nitride (g-C3N4) or graphite powder (commercially available) are used as carbon source. g-C3N4 is synthesized and characterized according to [18]. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) confirms the formation of g-C3N4 (Figure S1 in Supporting

• with either graphite or graphitic carbon nitride (g-C3N4) yields carbon-coated or nitrogen-doped carbon-coated metallic nanoparticles. When these reactions are conducted in a Teflon reactor, the products are further functionalized with fluorine. Figure 3a shows XRD patterns of Cu and Ni nanoparticles

• 10 mL of 0.5 M nitric acid and sonicated for 10 min. The resultant powder is washed with water several times until pH 7 and dried it in an oven at 50 °C for 2 h before being used in further microwave experiments. Synthesis of graphitic carbon nitride (g-C3N4) g-C3N4 is synthesized and characterized

A biomimetic nanofluidic diode based on surface-modified polymeric carbon nitride nanotubes

• Kai Xiao,
• Baris Kumru,
• Lu Chen,
• Lei Jiang,
• Bernhard V. K. J. Schmidt and
• Markus Antonietti

Beilstein J. Nanotechnol. 2019, 10, 1316–1323, doi:10.3762/bjnano.10.130

• and Discussion Fabrication of carbon nitride nanotube membrane Graphitic carbon nitride (g-CN) was chosen as it is formed from tri-s-triazine moieties interconnected via tertiary amines in a well-defined way without doping or modification, composed of only the two earth-abundant elements carbon and

• three peaks at 398.6, 399.7, and 400.9 eV. The C 1s peaks at 286.4 and 287.9 eV are associated to the major aromatic carbon species in the graphitic carbon nitride framework, representing the sp2-hybridized carbon atoms in the N-containing aromatic ring. The N 1s peak in 398.6 eV is from the sp2

• -hybridized nitrogen in the tri-s-triazine rings. The peak at 399.7 eV indicates the tertiary nitrogen N–C3 groups. In addition, the terminal amino groups on the surface are also confirmed by the peak at 400.9 eV. All these results are consistent with graphitic carbon nitride powder reported before [28][33

Synthesis of novel C-doped g-C₃N₄ nanosheets coupled with CdIn₂S₄ for enhanced photocatalytic hydrogen evolution

• Jingshuai Chen,
• Chang-Jie Mao,
• Helin Niu and
• Ji-Ming Song

Beilstein J. Nanotechnol. 2019, 10, 912–921, doi:10.3762/bjnano.10.92

• technology based on semiconductor materials is a promising strategy for advancing the utilization of solar energy to the level of viable industrial production, such as organic synthesis [1][2], environmental governance [3][4], as well as fuel production [5][6]. Graphitic carbon nitride (g-C3N4), as a novel

Mo-doped boron nitride monolayer as a promising single-atom electrocatalyst for CO₂ conversion

• Qianyi Cui,
• Gangqiang Qin,
• Weihua Wang,
• Lixiang Sun,
• Aijun Du and
• Qiao Sun

Beilstein J. Nanotechnol. 2019, 10, 540–548, doi:10.3762/bjnano.10.55

• efficiency than conventional nanoparticles [22][23][24][25]. To date, the catalysts that have employed various single transition metal (TM) atoms anchored on the different substrates such as graphene [26][27][28][29] and graphitic carbon nitride [30][31][32][33][34], have presented good performance and high

Reduced graphene oxide supported C₃N₄ nanoflakes and quantum dots as metal-free catalysts for visible light assisted CO₂ reduction

• Md Rakibuddin and
• Haekyoung Kim

Beilstein J. Nanotechnol. 2019, 10, 448–458, doi:10.3762/bjnano.10.44

• heating at 130–190 °C for 5−20 h. It is observed that hydrothermal exposure of acid-treated graphitic carbon nitride (g-C3N4) nanosheets at low temperature generated larger NFs, whereas QDs are formed at higher temperatures. The formation of GCN hybrid materials was confirmed by powder X-ray diffraction

• conduction band (CB) and valence band (VB) edge positions, exhibit efficient charge separation, have a large surface area, and it must be cost effective. Considering the above factors, nontoxic metal-free catalysts, such as graphitic carbon nitride (g-C3N4) and reduced graphene oxide (rGO) have received wide

Oriented zinc oxide nanorods: A novel saturable absorber for lasers in the near-infrared

• Pavel Loiko,
• Tanujjal Bora,
• Josep Maria Serres,
• Haohai Yu,
• Magdalena Aguiló,
• Francesc Díaz,
• Uwe Griebner,
• Valentin Petrov,
• Xavier Mateos and
• Joydeep Dutta

Beilstein J. Nanotechnol. 2018, 9, 2730–2740, doi:10.3762/bjnano.9.255

• , e.g., MoS2, WS2 [16][17], black phosphorus (BP) [18]), and topological insulators (TIs, e.g., Bi2Te3, Sb2Te3 [19][20], graphitic carbon nitride (g-C3N4) [21]). In the PQS regime, such structures enable the generation of nanosecond pulses at high repetition rates (up to MHz) and they are attractive for

Nanocellulose: Recent advances and its prospects in environmental remediation

• Katrina Pui Yee Shak,
• Yean Ling Pang and
• Shee Keat Mah

Beilstein J. Nanotechnol. 2018, 9, 2479–2498, doi:10.3762/bjnano.9.232

• graphitic carbon nitride [2][3], carbon nanodots [4], and two-dimensional carbon-based nanocomposites [5][6][7] are a few trending nanomaterials that have already found extensive applications in both environmental remediation and energy generation. In the past, carbon nanotubes (CNTs) have received a great

Metal-free catalysis based on nitrogen-doped carbon nanomaterials: a photoelectron spectroscopy point of view

• Mattia Scardamaglia and
• Carla Bittencourt

Beilstein J. Nanotechnol. 2018, 9, 2015–2031, doi:10.3762/bjnano.9.191

• between graphitic N and pyridinic N. In the report of Parvez et al., nitrogen-doped graphene was synthesized from a composite made of graphitic carbon nitride and graphene sheets, which subsequently underwent heating treatment [107]. Depending on the pyrolysis temperature (800, 900 or 1000 °C), three

Improving the catalytic activity for hydrogen evolution of monolayered SnSe_2(1−x)S_2x by mechanical strain

• Sha Dong and
• Zhiguo Wang

Beilstein J. Nanotechnol. 2018, 9, 1820–1827, doi:10.3762/bjnano.9.173

• strengthen the hydrogen binding on graphitic carbon nitride (g-C3N4), whereas compressive strain had the opposite effect. Yan et al. [49] showed that large elastic strains influence the catalytic activity of WC for HER. Very recently, 2D SnSe2(1−x)S2x alloys have been synthesized experimentally [35]. To our

Perovskite-structured CaTiO₃ coupled with g-C₃N₄ as a heterojunction photocatalyst for organic pollutant degradation

• Ashish Kumar,
• Christian Schuerings,
• Suneel Kumar,
• Ajay Kumar and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2018, 9, 671–685, doi:10.3762/bjnano.9.62

• Ashish Kumar Christian Schuerings Suneel Kumar Ajay Kumar Venkata Krishnan School of Basic Sciences and Advanced Materials Research Center, Indian Institute of Technology Mandi, Kamand, Mandi 175005, Himachal Pradesh, India 10.3762/bjnano.9.62 Abstract A novel graphitic carbon nitride (g-C3N4

• degradation of pollutants has been proposed and discussed. Keywords: CaTiO3; graphitic carbon nitride (g-C3N4); heterojunction photocatalyst; pollutant degradation; Introduction Photocatalysis is recognized as an attractive approach for environmental remediation and energy generation applications due to its

• 2D–2D nanocomposites could effectively improve the specific surface area and provide abundant reaction sites to adsorb reactant species on their surface, which can significantly enhance the photocatalytic activity [15][16]. Recently, graphitic carbon nitride (g-C3N4), which is a metal-free polymeric

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

• Kah Hon Leong,
• Azrina Abd Aziz,
• Lan Ching Sim,
• Pichiah Saravanan,
• Min Jang and
• Detlef Bahnemann

Beilstein J. Nanotechnol. 2018, 9, 628–648, doi:10.3762/bjnano.9.59

• . Such materials have already been applied in various environmental and energy conversion applications [36]. Recently, the evolution of a metal-free semiconductor, graphitic carbon nitride (g-C3N4), has been discovered as an alternative for plasmonic photocatalysts. This metal-free semiconductor by

• photocatalytically inert due to their unfavourable band edge position compared to the redox potential of targeted species. An effective approach to overcome this restriction was to integrate the nonstoichiometric materials (tungsten oxide (W18O49)) with graphitic carbon nitride (g-C3N4). The g-C3N4 was used to

Sugarcane juice derived carbon dot–graphitic carbon nitride composites for bisphenol A degradation under sunlight irradiation

• Lan Ching Sim,
• Jing Lin Wong,
• Chen Hong Hak,
• Jun Yan Tai,
• Kah Hon Leong and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2018, 9, 353–363, doi:10.3762/bjnano.9.35

• Laboratory, Department of Environmental Science and Engineering, Indian Institute of Technology (ISM), Dhanbad 826004, Jharkhand, India 10.3762/bjnano.9.35 Abstract Carbon dots (CDs) and graphitic carbon nitride (g-C3N4) composites (CD/g-C3N4) were successfully synthesized by a hydrothermal method using

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

• way by using two of the most abundant natural resources, namely sunlight and water. Over the past few years, carbon-based nanocomposites, particularly graphene and graphitic carbon nitride, have attracted much attention as interesting materials in this field. Due to their unique chemical and physical

• perspectives of research in this field are also briefly mentioned. Keywords: energy generation; environmental remediation; graphene; graphitic carbon nitride; nanocomposites; photocatalysis; two-dimensional carbon; Review Introduction The problems of global energy shortage and environmental pollution are

• of the most abundant elements on the earth. In the past two decades, carbon-based materials such as graphene, graphitic carbon nitride (g-C3N4), fullerenes and carbon nanotubes (CNTs) have been explored for various applications such as Li-ion batteries [22], supercapacitors [23], energy storage [24

Biomolecule-assisted synthesis of carbon nitride and sulfur-doped carbon nitride heterojunction nanosheets: An efficient heterojunction photocatalyst for photoelectrochemical applications

• Hua Bing Tao,
• Hong Bin Yang,
• Jiazang Chen,
• Jianwei Miao and
• Bin Liu

Beilstein J. Nanotechnol. 2014, 5, 770–777, doi:10.3762/bjnano.5.89

• -doped graphitic carbon nitride (CNS) nanosheets. During the synthesis, sulfur could be introduced as a dopant into the lattice of carbon nitride (CN). Sulfur doping changed the texture as well as relative band positions of CN. By growing CN on preformed sulfur-doped CN nanosheets, composite CN/CNS

• : graphitic carbon nitride (g-C3N4); heterojunction; photoelectrochemical; photocatalysis; sulfur doping; Introduction Over the past few years, graphitic carbon nitride (CN) has attracted significant research attention in visible-light-driven photocatalysis because of its unique physical and chemical

• to the efficient separation of photoexcited charge carriers across the heterojunction interface. Our approach offers a facile way to construct an all carbon nitride based heterojunction photocatalyst. Experimental Materials preparation Graphitic carbon nitride (CN) was prepared according to a